Ab-soft ATX 12V Uživatelský manuál Strana 1

• Please read the users guide before proceeding with your installations. Serious damage may occur if the procedure is not followed properly. • This

Hardware Installation SY- P4I865PE Plus DRAGON 2 5 Warning: Do not apply power if the Motherboard appears damaged. If there is damage to the board, c

Hardware Installation SY- P4I865PE Plus DRAGON 2 6 1-6 SY-P4I865PE PLUS DRAGON 2 MOTHERBOARD LAYOUT Back Panel SY-P4I865PE Lite DRAGON 2 Platform

Hardware Installation SY- P4I865PE Plus DRAGON 2 7 1-7 SY-P4I865PE PLUS DRAGON 2 MOTHERBOARD COMPONENTS ABCDE F G H IJKLMNOPQRSTUVWXYZAAABACADAE

Hardware Installation SY- P4I865PE Plus DRAGON 2 8 A +12V Power Connector This is where the Power Supply's +12V ATX connector goes. For a lay-ou

Hardware Installation SY- P4I865PE Plus DRAGON 2 9 H CPU Cooling Fan (CPUFAN1) connectors With these connectors you can attach the CPU fan or fans to

Hardware Installation SY- P4I865PE Plus DRAGON 2 10 O Chassis Cooling Fan (CHAFAN1) connector This connector is to connect your chassis fan to your m

Hardware Installation SY- P4I865PE Plus DRAGON 2 11 V GAMEPORT connector This connector is to attach your gameport connector to. Gameports are used t

Hardware Installation SY- P4I865PE Plus DRAGON 2 12 AC AC97 Onboard Audio Chip AD Microphone and LAN Status LED Connector (J30) This connector allows

Hardware Installation SY- P4I865PE Plus DRAGON 2 13 Chapter 2 HARDWARE INSTALLATION Congratulations on your purchase of SY-P4I865PE Plus DRAGON 2 Mot

Hardware Installation SY- P4I865PE Plus DRAGON 2 14 2-2 INSTALLATION GUIDE We will now begin the installation of the Motherboard. Please follow the st

SY-P4I865PE Plus DRAGON 2 Motherboard **************************************************** mPGA Socket 478 Processor supported Intel 865PE AGP/PCI 4

Hardware Installation SY- P4I865PE Plus DRAGON 2 15 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3.

Hardware Installation SY- P4I865PE Plus DRAGON 2 16 4. Then close the socket handle to secure the CPU in place. Remember to connect the CPU Cooling

Hardware Installation SY- P4I865PE Plus DRAGON 2 17 Step 2 Install Memory Module This motherboard supports one Dual Channel to your memory, Note t

Hardware Installation SY- P4I865PE Plus DRAGON 2 18 Memory Configuration Table If you want to use the Dual Channel feature, please follow the memory c

Hardware Installation SY- P4I865PE Plus DRAGON 2 19 Step 3 Installation of Expansion Cards The motherboard has 1 AGP slot and 5 PCI slots. 1. Read the

Hardware Installation SY- P4I865PE Plus DRAGON 2 20 Step 4 Connect cables, case wire, and power supply A.IDE Device Installation (HDD, CD-ROM) This

Hardware Installation SY- P4I865PE Plus DRAGON 2 21 Note: IDE2 and SATA2 are not bootable, SATA1 and IDE1 are bootable. Note: Only Windows XP can

Hardware Installation SY- P4I865PE Plus DRAGON 2 22 Serial ATA connectors You can also plug the serial ATA cable into the serial ATA connector of the

Hardware Installation SY- P4I865PE Plus DRAGON 2 23 B. Floppy Drive Installation The system supports 5 possible floppy drive types: 720 KB, 1.2 MB, 1.

Hardware Installation SY- P4I865PE Plus DRAGON 2 24 C. Front Panel Connections Plug the computer case's front panel devices to the correspondin

SOYO™ SY-P4I865PE Plus DRAGON 2 iii Copyright © 2003 by Soyo Computer Inc. Trademarks: Soyo is the registered trademark of Soyo Computer Inc. All tra

Hardware Installation SY- P4I865PE Plus DRAGON 2 25 2. Reset Plug the Reset push-button cable into the 2-pin Reset header on the Motherboard. Pushing

Hardware Installation SY- P4I865PE Plus DRAGON 2 26 5. IDE LED Attach the 2-pin IDE device LED cable to the corresponding IDE LED header on the Mother

Hardware Installation SY- P4I865PE Plus DRAGON 2 27 D. Back Panel Connections All external devices such as the PS/2 keyboard, PS/2 mouse, printer, mod

Hardware Installation SY- P4I865PE Plus DRAGON 2 28 1. Onboard Serial Ports COMA/COMB External peripherals that use serial transmission scheme include

Hardware Installation SY- P4I865PE Plus DRAGON 2 29 5. Universal Serial Bus (USB1/USB2, USB3/USB4, USB20_1/USB20_2) This Motherboard provides 8 USB 2.

Hardware Installation SY- P4I865PE Plus DRAGON 2 30 The Gameport has the following lay-out : E. Other Connections 1. Standard Infrared (SIRCON) Plug t

Hardware Installation SY- P4I865PE Plus DRAGON 2 31 2. Cooling Fan Installation (1) CPU Cooling Fan (CPUFAN1) After you have seated the CPU properly o

Hardware Installation SY- P4I865PE Plus DRAGON 2 32 (2) Chassis Cooling Fan (CHAFAN1, CHAFAN2) Some chassis also feature a cooling fan. This Motherboa

Hardware Installation SY- P4I865PE Plus DRAGON 2 33 3. Smart Card Reader The smart card reader conforms to the PC/SC Working group standard, and has t

Hardware Installation SY- P4I865PE Plus DRAGON 2 34 5. AUX-IN (AUXIN1) This Motherboard provides one AUX-IN connectors. Please connect the 4-pin audio

Table of Contents SY-P4I865PE Plus DRAGON 2 iv Table of Contents CHAPTER 1 MOTHERBOARD DESCRIPTION ... 1 1-1 INTRODUCTI

Hardware Installation SY- P4I865PE Plus DRAGON 2 35 F. ATX12V Power Supply The power supply connector is the last connection to be made while installi

Hardware Installation SY- P4I865PE Plus DRAGON 2 36 3.3V-12VGNDPS-ONGNDGNDGND-5V5V5V3.3V3.3VGND5VGND5VGNDPW-OK5VSB12VATX Power Note 3: The minimum re

Hardware Installation SY- P4I865PE Plus DRAGON 2 37 G. CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below

Hardware Installation SY- P4I865PE Plus DRAGON 2 38 Onboard LAN LED Definition Step 5 Power On You have now completed the hardware installation of you

Hardware Installation SY- P4I865PE Plus DRAGON 2 39 Repeat this operation until you get the following screen. 3. The BIOS Setup screen appears: Phoeni

Hardware Installation SY- P4I865PE Plus DRAGON 2 40 Step1. Select [STANDARD CMOS SETUP] Set [Date/Time] and [Floppy drive type], then set [Hard Disk

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 41 Chapter 3 BIOS SETUP UTILITY This Motherboard's BIOS setup program uses the ROM PCI BIOS progr

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 42 Hot Keys: Function keys give you access to a group of commands throughout the BIOS utility. Function

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 43 SAVE AND EXIT SETUP Select the [SAVE & EXIT SETUP] option from the Main Menu to save data to CMOS

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 44 3-1 SOYO COMBO FEATURE This motherboard does not use any hardware jumpers to set the CPU frequency.

Table of Contents SY-P4I865PE Plus DRAGON 2 v 3-4 ADVANCED CHIPSET FEATURES ... 63 3-5 INTEGRATED PERIPHERAL

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 45 System Performance Setting Description Note Normal DefaultFast System Performance Turbo Adju

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 46 SOYO COMBO Feature (Continue) Setting Description Note Disabled Quick Power On Self Test Enab

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 47 3-1.1 Advanced DRAM Control Caution: Change these settings only if you are already familiar with DRA

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 48 CHIPSET FEATURES SETUP (Continue) Setting Description Note 2 3 DRAM RAS# to CAS# Delay 4 This

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 49 3-1.2 Onboard Device The [Onboard Device] option changes the values of the chipset registers. These r

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 50 3-1.3 OnChip IDE Device Caution: Change these settings only if you are already familiar with the IDE

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 51 CHIPSET FEATURES SETUP Setting Description Note IDE only Only enabled IDE1,2. SATA1,2 are disabl

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 52 IDE Device Controls Setting Description Note Disabled Turn off the on-board IDE On-Chip PCI IDE

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 53 3-1.4 Boot Device Order The [Boot Device Order] option allows you to change the order in which your s

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 54 System Boot Control Settings Setting Description Note Floppy LS120 IDE1/SATA1 CDROM ZIP10

Hardware Installation SY- P4I865PE Plus DRAGON 2 1 Chapter 1 MOTHERBOARD DESCRIPTION 1-1 INTRODUCTION The SY-P4I865PE Plus DRAGON 2 AGP/PCI Motherbo

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 55 3-2 STANDARD CMOS SETUP Select the [STANDARD CMOS SETUP] option from the Main Menu and press [Enter]

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 56 Hard Disks Type & Mode Choose the type and mode for the hard disks that you have already installe

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 57 Others Optional Setting Description Note EGA/VGA Default CGA 40 CGA 80 Video MONO (Monochrom

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 58 3-3 ADVANCED BIOS FEATURES Select the [Advanced BIOS Features] option from the Main Menu and press [

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 59 Virus Warning Setting Description Note Disabled Default Virus Warning Enabled Allows you to choo

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 60 Boot Up NumLock Status Setting Description Note On Numeric keypad in numeric mode at boot-up. Def

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 61 Security Option Use this feature to prevent unauthorized system boot-up or use of BIOS Setup. The fol

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 62 LOGO Show Setting Description Note Disabled Full Screen LOGO Show Enabled Set Enabled to Show L

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 63 3-4 ADVANCED CHIPSET FEATURES Caution: Change these settings only if you are already familiar with t

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 64 CHIPSET FEATURES SETUP Setting Description Note Disabled DefaultSystem BIOS Cacheable Enabled

Hardware Installation SY- P4I865PE Plus DRAGON 2 2  One Back panel Warning: Do not unpack the Motherboard from its anti-static packaging until

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 65 3-5 INTEGRATED PERIPHERALS Caution: Change these settings only if you are already familiar with the C

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 66 3-5.1 Onboard USB Device This [Onboard USB Device] option changes the values of the onboard USB contr

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 67 3-5.2 SuperIO Device Caution: Change these settings only if your are already familiar with the Chipse

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 68 Others Optional Setting Description Note Password Enables you to wake-up the system by entering

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 69 Onboard Serial Ports Setting Description Note Normal DefaultIrDA ASKIR UART Mode Select SCR

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 70 Others Optional Setting Description Note On The system will switch on when power comes back after

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 71 3-6 POWER MANAGEMENT SETUP The [POWER MANAGEMENT SETUP] sets the system's power saving function

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 72 Power Management Controls Setting Description Note S1(POS) Default S3(STR) ACPI Suspend Type S

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 73 Power Management Controls (Continue) Setting Description Note Disabled Default HDD Power Down

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 74 Reload Global Timer Events Setting Description Note Disabled DefaultIDE0, IDE1  Primary  Sec

Hardware Installation SY- P4I865PE Plus DRAGON 2 3 1-3 KEY FEATURES CPU Supports Intel® mPGA Socket 478 processors :  Pentium® 4 with and without Hyp

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 75 3-7 PNP/PCI CONFIGURATION SETUP This option sets the Motherboard's PCI configuration. Phoenix –

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 76 PNP/PCI Configuration Controls Setting Description Note Disabled Retain PnP configuration data i

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 77 PNP/PCI Configuration Setup (Continued) Setting Description Note How to set the BIOS to release t

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 78 3-8 PC HEALTH STATUS This option sets the Motherboard's PC Health Status. Phoenix – Award BIOS

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 79 3-9 LOAD FAIL-SAFE DEFAULTS Select the [Load Fail-Safe Defaults] option from the Main Menu to load a

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 80 3-10 LOAD OPTIMIZED DEFAULTS Select the [Load Optimized Defaults] option from the Main Menu to load t

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 81 3-11 SUPERVISOR PASSWORD Based on the setting you have made in the [Security Option] of the [Advanced

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 82 3. Enter your new password and press [Enter]. The following message appears, prompting to confirm th

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2 83 Boot Menu Boot Menu enables user to boot-up on different boot device without going into the BIOS setu

Drivers installation SY- P4I865PE Plus DRAGON 2 84 Chapter 4 DRIVERS INSTALLATION The SOYO-CD will Auto Run only in Windows Based Operating Systems.

Hardware Installation SY- P4I865PE Plus DRAGON 2 4 Storage  ICH5 integrated Serial ATA controller supporting up to 2x UDMA 150 hard disks  ICH5 Int

Drivers installation SY- P4I865PE Plus DRAGON 2 85 The user's manual files included on the SOYO CD are in PDF (Postscript Document Format). In or

Drivers installation SY- P4I865PE Plus DRAGON 2 86 Step 2. Install Drivers and Utilities Highlight the driver you want to install and then click ok.

Drivers installation SY- P4I865PE Plus DRAGON 2 87  C-MEDIA Audio Driver for Win 9x/ME/2000/NT/XP The driver supports 2/4/6 speakers 3D positional au

Drivers installation SY- P4I865PE Plus DRAGON 2 88 After Windows XP installation, your device manager should look like this:

Drivers installation SY- P4I865PE Plus DRAGON 2 89 After driver installation, your Windows XP device manager should look like this: Note: To install

Drivers installation SY- P4I865PE Plus DRAGON 2 90 Drivers directory list in the CD driver

Intel USB 2.0 Driver Installation SY- P4I865PE Plus DRAGON 2 91 Chapter 5 INTEL USB 2.0 DRIVER INSTALLATION For Windows XP USB 2.0 drivers are avail

Intel USB 2.0 Driver Installation SY- P4I865PE Plus DRAGON 2 92 10.Choose [Search for a suitable driver for my device]. 11.Click [Next]. 12.Choose [Sp